How to safely use air shower?
2016-09-05 16:25:14
First, the electrical safety matters
1. The first product in place before wiring, connected to the supply operations to avoid personal injury.
2. Make sure the product's rated voltage and frequency of the input power is consistent with the parameters, in order to avoid damage to electrical components, causing a fire.
3. Airshower fan for the three-phase 380v power supply, if the reverse would lead to decreased wind speed, then just swap any two can resume normal work.
Second, the operational safety matters
1. Under normal atmospheric conditions, the insulation resistance value Airshower source and output end of the housing or conductive part exposed should be greater than 20M, the insulation resistance value after the humidity test should be greater than 2M.
2. After the power is turned on immediately double door interlock can only open one door, not at the same time forcibly opened two doors, otherwise it will damage the two-door interlock system.
3. After entering the air shower room, closed the door, blowing leaching started immediately; after blowing leaching is completed, in order to lock the door, open only to go out, go out from this case can not be forced to open the door, otherwise it will damage the two-door interlock system.
4. blowing leaching process, press the emergency stop switch to immediately stop air shower, double doors can be opened.
5. The work found abnormal, should be promptly cut off the power supply and inform the maintenance personnel process.
6. Maintenance should first cut off the power supply, air shower price to avoid accidentally start running, causing personal injury.
Third, the basic security matters
1. Please do not regard the source and the source of the high-speed dust.
2. Do not wipe the cabinet with benzene, thinners, solvents and other corrosive, to avoid harming the finish or cause discoloration.
3. It is prohibited for the following properties: low temperature, high temperature, humidity, condensation, dust and soot, mist place.
4. Air shower room wall is made of stainless steel mirror light, do not scratch the panel by hand or something, affect the appearance.
1. The first product in place before wiring, connected to the supply operations to avoid personal injury.
2. Make sure the product's rated voltage and frequency of the input power is consistent with the parameters, in order to avoid damage to electrical components, causing a fire.
3. Airshower fan for the three-phase 380v power supply, if the reverse would lead to decreased wind speed, then just swap any two can resume normal work.
Second, the operational safety matters
1. Under normal atmospheric conditions, the insulation resistance value Airshower source and output end of the housing or conductive part exposed should be greater than 20M, the insulation resistance value after the humidity test should be greater than 2M.
2. After the power is turned on immediately double door interlock can only open one door, not at the same time forcibly opened two doors, otherwise it will damage the two-door interlock system.
3. After entering the air shower room, closed the door, blowing leaching started immediately; after blowing leaching is completed, in order to lock the door, open only to go out, go out from this case can not be forced to open the door, otherwise it will damage the two-door interlock system.
4. blowing leaching process, press the emergency stop switch to immediately stop air shower, double doors can be opened.
5. The work found abnormal, should be promptly cut off the power supply and inform the maintenance personnel process.
6. Maintenance should first cut off the power supply, air shower price to avoid accidentally start running, causing personal injury.
Third, the basic security matters
1. Please do not regard the source and the source of the high-speed dust.
2. Do not wipe the cabinet with benzene, thinners, solvents and other corrosive, to avoid harming the finish or cause discoloration.
3. It is prohibited for the following properties: low temperature, high temperature, humidity, condensation, dust and soot, mist place.
4. Air shower room wall is made of stainless steel mirror light, do not scratch the panel by hand or something, affect the appearance.
